|
Sale Reference: |
OS-15 |
|
Sale Heading: |
Steel Fabrication Equipment |
|
Sale Type: |
Traditional Public Auction |
|
Sale Location: |
H & S Steel Fabrications |
|
|
15 Burns Road |
|
|
HEATHCOTE |
|
Sale Date: |
Wednesday 17th May 2006 |
|
Sale Time: |
10.00am |
|
Inspection Times: |
Tuesday 16th May 9am - 4pm |
|
Sale Terms: |
NO Cheques accepted, unless prior arrangement made with Auctioneers |
|
|
All purchases MUST be paid for in FULL on Sale Day |
|
|
Eftpos Facilities vailable |
|
Enquiries: |
David Purtle |
|
Email Enquiries: |
|
|
Phone Enquiries: |
0419 630 949 |
|
Buyers Premium: |
11% (GST Inc) added to Hammer Price |
|
Bidder Card System: |
YES |
|
GST Inclusive: |
Sale conducted on a GST INCLUSIVE BASIS |
CATALOGUE NEXT PAGE
CATALOGUE PARTLY INCOMPLETE
Complete Catalogue available on day of sale at Office
TERMS & CONDITIONS
SPECIAL NOTES FOR BUYERS
The following terms & conditions of sale set out in this catalogue are intended to assist buyers in properly and conveniently effecting their purchase.
SPECIAL NOTE: A BUYERS PREMIUM OF 11% WILL APPLY TO ALL LOTS SOLD
Registration: Buyers MUST register prior to bidding and obtain a bidder card from the auctioneers
clerk before entry to the auction premises will be permitted.
Deposits: Buyers should note that a cash deposit Of $50 or 20% (whichever is the greater) is required
on the fall of the hammer on each lot.
PAYMENTS OF ALL ACCOUNTS MUST BE FINALISED BY 4.00PM ON DAY OF SALE.
Payment of invoice is required in either Cash, Bank Cheque or Direct Deposit. NO Company or
personal cheques will be accepted unless arranged prior to the auction. Direct Deposits may be made
to:
SYDNEY AUCTIONS PTY LIMITED Commonwealth Bank – Argyle Street Camden
BSB 062 516 Account Number 2800 6340
TO EXPEDITE YOUR PICK-UP , PLEASE FAX A COPY OF YOUR DEPOSIT SLIP TO OUR SITE OFFICE – SEE OUR STAFF FOR RELEVANT FAX NUMBER
Company Cheques: A letter of reference MUST be obtained PRIOR TO THE AUCTION from
your bank as a general reference in respect to your credit worthiness. This reference need not be in
specific terms but must state that in the normal course of business you have not been known to extend
your accomodation. Failing to supply this reference will lead us to insist in payment in one of the other
manners listed above.
Transfer of Title: The bidder is the owner on the fall of the hammer on each lot and is therefore
strongly advised to effect insurance immediately. Neither the auctioneer nor the vendor will be held
responsible for any loss or damage to any lot after the fall of the hammer. Buyers should be aware of
the terms & conditions effecting the sale that may preclude them from taking delivery of their lots
immediately upon the fall of the hammer.
Clearance of Lots: Delivery will be made available following the completion of the auction until
5pm, and then on Thursday 18th & Friday 19th May from 9am to 4pm. All lots must be removed by
4.00 pm on Friday 19th May 2006.
( NOTE: PAYMENT MUST BE FINALISED BY 4.00PM SALE DAY )
ALL REMOVAL & DISCONNECTION WORK MUST BE CARRIED OUT BY LICENSED TRADESPERSONS. ORIGINAL LICENCES MUST BE PRODUCED PRIOR TO COMMENCEMENT OF WORK.
Children: No person under the age of 18 years will be permitted on the auction site.
Industrial Equipment Safety Warning. Sydney Auctions Pty Ltd warns buyers that ALL PLANT OR EQUIPMENT OFFERRED FOR SALE AT THIS AUCTION MAY NOT BE FIT FOR USE IN A WORKPLACE and it is the BUYERS OR USERS RESPONSIBILITY to ensure that it is brought to a state necessary to comply with Occupational Health & Safety Act and is safe and fit for use in the workplace. Breaches of the Occupational Health & Safety Act carry penalties for people who PURCHASE and OPERATE UNSAFE EQUIPMENT without conducting a thorough safety inspection. Plant MUST be given a safety inspection prior to operation when it is purchased at Auction.
IMPORTANT NOTICE
¨ PERSONS UNDER THE AGE OF 18 YEARS WILL NOT BE PERMITTED ON THE AUCTION SITE.
¨ TRADES PEOPLE eg ELECTRICIANSS PLUMBERS Etc WIOLL BE REQUIRED TO PRODUCE RELEVENT LICENCES BEFORE COMMENCING WORK ON SITE.
¨ FORKLIFT, CRANE DRIVERS, RIGGERS Etc WILL BE REQUIRED TO PRODUCE LICENCE BEFORE COMMENCING WORK ON SITE.
¨ IT IS A CONDITION OF ENTRY TO THE SITE THAT ALL VISITORS COMPLY TO THE DIRECTIONS GIVEN BY SYDNEY AUCTIONS STAFF OR REPRESENTATIVES.
¨ WORK DONE ON THIS SITE MUST COMPLY WITH AND BE COMPLETED IN A MANNER COMPLIANT WITH ALL OCCUPATIONAL HEALTH & SAFETY LEGISLATION.
¨ ALL POWER TOOLS AND EQUIPMENT USED ON THIS SITE MUST BE TESTED (TAGGED) SAFE FOR USE INACCORDANCE WITH AS3760 SERVICE TESTING AND INSPECTION OF ELECTRICAL EQUIPMENT.
¨ SYDNEY AUCTIONS WILL SPECIFY BASED ON HAZARDS PRESENT ON THE SITE , THE MANDATORY PERESONAL PROTECTION EQUIPMENT REQUIRED TO BE WORN PRIOR TO ENTRY TO THE SITE. ( Eg SAFETY FOOTWEAR, SAFETY EYEWARE, HARD HATS Etc.).
¨ THE USE OF CERTIFIED EQUIPMENT HARNESSES WORKPLATFORMS Etc WILL BE REQUIRED FOR ANY WORK CARRIED OUT ABOVE 1.8 METRES.
|
Lot |
ItemQty |
Description |
|
x |
x |
Sale starts at Lot 100 |
|
100 |
1 |
Contents Of Tearoom - Table, Pie Oven, Fridge, Microwave, Benches, Pedestal Fan, Heater Column & Television - To Be Tested Before Use |
|
101 |
1 |
4 Quicky Runner Rails |
|
102 |
1 |
1800 X 620 Steel Workbench & Contents |
|
103 |
1 |
Black Metal Tool Box |
|
104 |
1 |
3 Phase, Pak Master 50 Air Plasma Cutter System, Guage & Blue Stand - Jim's Electrical Tag - Manual In Office |
|
105 |
1 |
Contents Of Change Room Including All Lockers & Vacuum Cleaners - Sold As Scrap |
|
106 |
1 |
Cannister Industrial Vacuum Cleaner - Jim's Electrical Tag |
|
107 |
1 |
Halogen Floodlight On Stand - Jim's Electrical Tag |
|
108 |
1 |
Cigweld Transmig 350 Pulse & Remote Wire Feeder - Jim's Electrical Tag - Manual In Office |
|
109 |
1 |
Large 300 Amp Stick Welder - Sold As Parts/Scrap Only |
|
110 |
1 |
Small Chain Block & Gantry Trolley |
|
111 |
1 |
Steel Cabinet & Contents |
|
112 |
1 |
Wooden Rack & Multitude Of Bolts & Nuts |
|
113 |
1 |
Chubb Fire Extinguisher |
|
114 |
1 |
2 Door Black Locker & Contents |
|
115 |
1 |
Scruttons Universal Pedastal Grinder - Must Be Tested Before Use |
|
115a |
1 |
14m X 1m X 700mm Steel Work Bench |
|
116 |
1 |
Muramig 500 Welder & Muramig 3.2 Remote Wire Feeder - No Gun - To Be Sold As Scrap / Parts Only |
|
117 |
1 |
TM400 Stick Welder - Sold As Scrap / Parts Only |
|
118 |
1 |
Transmig 400 Only - No Gun Or Leads - Jim's Electrical Tag |
|
119 |
1 |
CIG Transmig 500 & Remote Wire Feeder Transmatic 3.2 - To Be Tagged |
|
119a |
1 |
Fire Extinguisher |
|
120 |
1 |
Pallet Of Approximately 31 Rolls Of 1.2mm Mig Wire |
|
121 |
1 |
6 Sheets Perforated Square Plate - 1 Large & 5 Small |
|
122 |
1 |
Ranby Stick Welder - No Leads Sold As Scrap Only |
|
123 |
1 |
Pallet Of 24 Boxes Boss 0.9mm Mig Wire |
|
124 |
1 |
6'' Offset Bench Vice |
|
125 |
1 |
Portable 4R Heavy Duty Wire Feed & 4 Wheel Trolley - Spare Parts Only |
|
126 |
1 |
Steel Bench (Light) & Contents |
|
127 |
1 |
Ranby Stick Welder & Leads - Spare / Scrap Only |
|
128 |
1 |
3 Bottle Trolleys |
|
129 |
1 |
Small Chain Block & Gantry Trolley |
|
130 |
2 |
Set Of 2 X 1.5 Tonne Renfroe Plate Grabs & Chains |
|
130a |
1 |
Pallet Lifter |
|
131 |
1 |
Scaffold Aluminium Ladder - Defective |
|
132 |
1 |
Anvil On Wooden Base |
|
132a |
1 |
3 X Truck Tiedown Ratchets |
|
133 |
1 |
3 Phase Circulatory Fan - Jim's Electrical Tag |
|
133a |
1 |
10m X 1m X 700mm Steel Work Bench |
|
134 |
1 |
6 X Screens |
|
135 |
1 |
Quantity Of Flat & Check Steel Plates |
|
135a |
1 |
Pipe Rack & Approximately 12 Various Lengths 6" - 8" |
|
136 |
1 |
2 X 100mm X 50mm X 8m Galvanised Rhs Plus 1 X150mm X 50mm X 8m Galvanised RHS |
|
137 |
1 |
150 X 75 I Beam, 120 Diameter Pipe, Pressed Channel, 90 X 90 Angle, 50 X 50 Angle |
|
138 |
1 |
Large Quantity Of Short Lengths Of Pipe Within Frame |
|
139 |
1 |
1 Universal Beam 150mm X 150mm X 12m |
|
140 |
1 |
125mm X 70mm X 12m Channel |
|
141 |
1 |
Universal Beam 250mm X 125mm X 12m |
|
142 |
1 |
Meba Bandsaw 3050 Includes Frame, Mounted Feed Rollers, 10m Entry, 2m Exit, Serial No. 13204, 500m Capacity - Jim's Electrical Tag, Detected Fault - Damaged Feed Controller Knob |
|
143 |
1 |
Feed Roller On Free Standing Frame |
|
143a |
1 |
Airless Paint Pump & Hoses On Trolley |
|
143b |
1 |
4 X Spray Guns, Respirator,6 Oxy Guages & Mesh Grid |
|
143c |
1 |
Steel Band Strapping Unit, Tensioner & Crimper |
|
144 |
1 |
Atra Ace Yellow Magnetic Drill - Jim's Electrical Tag - Manual In Office |
|
145 |
1 |
Green Canvas Lifting Sling |
|
146 |
1 |
5 Large G Clamps |
|
147 |
1 |
Atra Ace Model A50 Magnetic Drill & Stand - Jim's Electrical Tag - Manual In Office |
|
148 |
1 |
Hitachi Hammer Drill In Case & 1 Bit - Jim's Electrical Tag |
|
149 |
1 |
Comet Oxy Set & Gauges |
|
150 |
1 |
Cigweld Transmig 350 - No Leads, No Feeder, Parts Only Or Scrap |
|
151 |
1 |
Cigweld Transmig 350 With Feeder Guages & Leads - Jim's Electrical Tag |
|
152 |
1 |
Yamaha Diesel EWK 250E Engine Driven Welder - No Leads |
|
153 |
1 |
Bosch Portable Barrel Grinder / Buff - Jim's Electrical Tag |
|
154 |
1 |
Metabo 9" Angle Grinder - Jim's Electrical Tag |
|
155 |
1 |
Mixstar Portable Welder With Leads - Jim's Electrical Tag |
|
156 |
1 |
Erico 500 Stud Welder No Leads - Jim's Electrical Tag |
|
157 |
1 |
Big Black Tool Box, 2 Spirit Levels & 1.5m X 500mm Plus Discs |
|
158 |
1 |
Hitachi 3/4" Drive Electric Impact Wrench & Yellow Box Sockets - Jim's Electrical Tag |
|
159 |
1 |
Yellow Magnetic Drill With Chopped Leads - Parts Or Scrap Only |
|
160 |
1 |
Quell Fire Extingusher |
|
161 |
1 |
Box Of Approximately 18 Morse Taper Drill Bits |
|
162 |
1 |
Tin Of Sluggers - Used For Rotar Broaching |
|
163 |
1 |
Caddy Welder & Leads - Jim's Electrical Tag |
|
164 |
1 |
Gantry Trolley |
|
165 |
1 |
Large Magnetic Drill & Base - Jim's Electrical Tag |
|
166 |
1 |
Bosch 9" Angle Grinder - Near New Condition - Jim's Electrical Tag |
|
167 |
1 |
Hilti Hammer Drill - Jim's Electrical Tag |
|
168 |
1 |
Caddy Welder & Tig Leads - Jim's Electrical Tag - Manual In Office |
|
169 |
1 |
Hitachi 5" Angle Grinder - Jim's Electrical Tag |
|
170 |
1 |
Hilti Hammer Drill - Jim's Electrical Tag |
|
171 |
1 |
Hitachi 1/2" Hammer Drill - Jim's Electrical Tag |
|
172 |
1 |
Bosch Vbh 2/20 Se Hammer Drill - Jim's Electrical Tag |
|
173 |
1 |
Hilti Hammer Drill - Jim's Electrical Tag |
|
174 |
1 |
Hitachi 5" Angle Grinder - No Side Handle - Jim's Electrical Tag |
|
175 |
1 |
8 X 'G' Clamps |
|
176 |
1 |
Red Folding Tool Box & Mig Tips |